Auto Shut Off Valves ASV ASO

Auto Shut Off Valves ASV ASO

Auto Shut Off Valves For Reverse Osmosis RO Pure Water Systems ASV ASO

Most ASV Auto Shut Off Valves are set to activate when the tank pressure is 65% of the incoming water pressure.

  1. Auto Shut Off Valve For RO Reverse Osmosis System - 90 Percent - ASO ASV
    Auto Shut Off Valve For RO Reverse Osmosis System - 90 Percent - ASO ASV
    Auto Shut Off Valve set to trigger at 90 percent - System automatically shuts off when the tank pressure reaches 90% of the incoming line pressure. ASO ASV Comes with 1/4" OD Tube John Guest Speed Fit quick connectors. Made for use with systems that have a pressure booster pump such as a permeate pump. Adding a permeate pump to a system with a standard auto shut off valve works fine. But changing the auto shut off valve to one that triggers at 90 percent of incoming line pressure will increase the holding capacity of the tank and provide a faster flow rate when dispensing water from the faucet. • Increases flow and pressure • Increases storage tank capacity • Great for ice maker supply • Improves water quality • Extends membrane and diaphragm life • Reduces TDS creep.
    Learn More
    $37.99 Special Price $24.99 As low as $22.99
  2. AQUATEC- AFT - Auto Flush Kit with Timer- 1000
    Aquatec ® AFT Auto Flush Kit With Timer
    Aquatec ® AFT Auto Flush Kit With Timer. Reduces "brine to product" ratio. Improves system "TDS" rejection rate. Extends membrane life. Hermetically protected electronics for long life. One of the challenges addressed by Aquatec's Engineering staff was the development of a device that would assist the R.O. membrane to perform with maximum efficiency for longer time periods. Most designers recommend that a R.O. system be flushed on a regular basis. Aquatec's AFR 600 series Auto-Flush valve provides this flush. In addition, the AFT can reduce the "brine to product" ratio, especially in low "TDS" applications, while maintaining or improving system "TDS" rejection rate and extending membrane, sediment and carbon filter life. Upon system start-up and every hour thereafter, the 24 VAC normally closed solenoid valve automatically "power-flushes" the membrane at full pump flow, or full line pressure in unboosted systems, for 18 seconds every hour. Turbulent water action scrubs organic and inorganic contaminants from the membrane surface, extending membrane life and efficiency. The "power flush" occurs only while the system is in the water making mode. The flush cycle is reset automatically when the R.O. system repeats the "water making" mode after the "full tank shut-down" mode. Water which has been standing idle in the membrane module for an extended period, is purged to the drain.
    Learn More
    $79.99 Special Price $59.95 As low as $51.99
Be sure to check our Parts Department for important parts such as TDS Testers For Reverse Osmosis Membranes, Replacement Tanks, O-rings , Filter Housing Wrenches, Faucets, Pumps, Fittings, UV Systems and more parts for your reverse osmosis pure water filtration system.   View maintenance and servicing tips online at our Installation & Trouble shooting Guide.